picture The washing machine has long been an integral part of any home. The basis of its long-term operation is periodic maintenance and constant cleanliness.

Like any other household appliance, the washing machine requires some care and a very unpleasant moment is the mold that appears on the rubber.

This article will be about how to remove mold in a washing machine on rubber / elastic, as well as prevent its occurrence.

What are the reasons for the appearance?

The main consequences of mold: the appearance of dark spots on the sealing rubber and the unpleasant smell of mold in the drum of the washing machine, which is subsequently transferred to the washed items.

Mold cannot be ignored, as it is a direct breeding ground for various diseases. A few common causes of fungus and mold:

  • Washing clothes at low temperature. This is strictly prohibited, it is better to alternate both the operating modes and the temperature threshold.
  • Residual water inside the drum. Liquid can only remain in the washer if its drain system is not properly maintained and clogged. A simple button leads to constant moisture in the drum.
  • Uncovered door. The seal not only prevents water from escaping during washing, it also prevents air from entering the machine after the process itself. A little liquid and an excess of oxygen is a favorable environment for the appearance of harmful microorganisms.
  • Even once left water in the drum can lead to the rapid development of mold. Therefore, the washing machine requires constant care and periodic inspection.

    How to remove folk remedies?

    The first thing you need to start fighting mold is a thorough inspection of all work surfaces to identify all mold pockets.

    These surfaces include:

    • drum door seal
    • detergent tray,
    • filter,
    • water inlet and outlet hose.

    In general, places that are constantly in contact with water. After processing and cleaning, these places should be re-examined.

    Vinegar is the main enemy of bacteria

    Many housewives prefer to use table vinegar in the fight against harmful microorganisms, as a practical and inexpensive remedy. By its effectiveness, vinegar is not inferior to expensive household chemicals.

    Vinegar cleaning sequence:

  • Pour at least 200 ml of table vinegar into the bleach container. For convenience, you can use a measuring cup.
  • Start the longest operating mode and set the maximum temperature. Make sure the water in the washing machine is hot and the heating element is working.
  • After the end of washing, it is necessary to pour 200 ml of vinegar into the container again. If desired, vinegar can be replaced with citric acid - it leaves a pleasant and fresh smell inside the drum. Start the rinse cycle.
  • After the end of the washing machine, it is necessary to repeat the process and turn on the rinse mode again. Now you don’t need to pour vinegar or add citric acid, just rinse everything with plain water.
  • After rinsing is over, you can open the door and wipe the inside of the drum clean with a dry cloth. Leaving wet spots is strictly prohibited.
  • Lemon acid

    The sequence of simple and quick cleaning of the rubber of the washing machine with citric acid:

  • Work surface preparation. To do this, the rubber seal over the entire surface must be wiped with an ordinary damp cloth. You can also use a soft sponge for washing dishes and a mild soap solution. Use a sponge or cloth to wipe off dirt and debris on the seal.
  • Cover the seal with cleaner. It is best to use a heavier-textured laundry cloth. Soak the cloth in a surface cleaner, then rub the rubber around the drum cover liberally.

    You can not skip hard-to-reach places, this is the first hotbed of mold and fungus.

  • Close the door tightly and leave the machine for at least 2 hours. After the end of the specified time, the seal can not be wiped, but simply run the washing machine in the "Rinse" mode. It's better to do it a couple of times.
  • Pour in citric acid and turn on a short-term operating mode with a maximum temperature. Make sure the heating element is working properly.
  • After the above steps, the cleanliness of the rubber seal is guaranteed, you can safely proceed to washing clothes.

    Peroxide and boric acid

    You can clean the rubber of a washing machine with the help of products sold in every pharmacy: hydrogen peroxide and boric acid.

    Hydrogen peroxide cannot be applied directly to rubber, it must first be cleaned of mold before the process. This drug is very effective - it kills the remnants of bacteria that are not visible to the human eye, and then whitens the surface.

    Before using boric acid, it must be diluted with plain water. After dilution, the solution should be applied to the rubber seal with cotton wool and left for 1-1.5 hours, then rinsed off.

    Before applying boric acid, it is necessary to protect the skin, simple household gloves are suitable for this.

    Baking soda

    Baking soda is an inexpensive and practical way to remove mold from both rubber and paintwork surfaces.

    Soda diluted in water (one teaspoon per glass of water is enough) will not harm paint or enamel.

    It is enough to wipe the infected surfaces several times with a sponge or household cloth, then rinse the solution with plain water.

    Top 5 Chemicals for Cleaning Rubber Parts

    If folk remedies do not help, it's time to turn to special household preparations. Top 5 products will remove mold or fungus quickly, permanently and inexpensively.


    A universal agent that removes mold, various types of harmful microorganisms, as well as an unpleasant odor. HG is more commonly used for cleaning tiles, but it is suitable for rubber and silicone products.

    Mode of application:

    • apply to mold or mildew
    • wait 1-2 hours
    • wash off with a damp sponge.

    Price: from 400 rubles.


    The combination of affordable price and efficiency makes Tiret a very popular tool for cleaning the washing machine from mold or fungus. The cost of 250 ml is only 200 rubles.

    Mode of application:

    • soak a sponge in Tiret and wipe the infected area several times,
    • leave for 30-40 minutes
    • rinse with clean water.


    Blanidas belongs to the category of professional chemistry. Like HG, it is more often used to clean tiles and tiles, but can also be applied to rubber seals. Price: 400 rubles.

    Mode of application:

    • soak a sponge in Blanidas and wipe the infected area several times,
    • leave for 1-1.5 hours,
    • rinse with clean water.

    Dr. Beckmann

    Good quality product at an affordable price. The cost of Dr. Beckmann is only 300 rubles.

    Mode of application:

    • fill the contents of one package Dr. Beckmann directly into the washing machine drum,
    • turn on the "Rinse" mode,
    • after finishing work, wipe the inner surface of the drum qualitatively and dry.


    Cheap, but high-quality tool for removing mold and fungus. In addition to cleansing, it also has a disinfecting effect. Price: 100 rubles.

    Mode of application:

    • apply to infected surface
    • rinse with clean water after 30 minutes.

    How to prevent mold stains?

    The washing machine is cleaned of harmful microorganisms, but if used improperly, mold and fungus can return again.

    To prevent this, you should follow a few useful tips:

  • Even if the drain of the washing machine is working properly, after washing, the surface of the drum should be wiped dry with a dry cloth. Excess moisture not only leads to mold, but also reduces the life of metal parts.
  • The ideal condition for the appearance of microorganisms is wet laundry left for an hour or two. To avoid this, laundry should be picked up immediately after washing.
  • Do not leave water in the powder and bleach tray. After washing, the tray must be removed and wiped dry with a cloth.
  • The filter of the washing machine must be changed according to the instruction manual for the household appliance. A minimal delay will create favorable conditions for the growth of mold.
  • Periodic preventive maintenance is a prerequisite for long-term operation of the washing machine. Therefore, 2-3 times a month, laundry should be washed, including the maximum temperature regime.
  • This will help remove the seedbed of harmful microorganisms in the bud, as well as clean all surfaces of the household appliance from scale and other deposits.

    What to do if nothing helps?

    If all methods, methods and means have been tried, and the mold still remains on the seal, then the only way out is to replace it.

    It is better to do this in a specialized center, or by calling the master at home.

    Incorrect replacement of the seal will lead to constant water leakage during washing, which will not have a very favorable effect on the further operation of the household appliance.

    How to clean a washing machine from mold:

    Summing up

    The article discusses the most practical and effective methods for cleaning the sealing rubber of a washing machine, as well as its internal parts.

    The most effective are folk methods: table vinegar and citric acid. These products not only destroy mold and fungus, but also descale the surfaces of washing machine parts, which favorably affects its operational life.